List of products by brand RF Armor

120 Sector Kit 2/5 GHz USK12025

USK12025
USK12025 SK12025 fits the following Ubiquiti antennas: AM-2G-120-15 (2 GHz 120 degree 15 dBi) AM-5G-120-19 (5 GHz 120 degree 19 dBi) RF Armour reduces unwanted RF energy from the back, sides, top and bottom outside the desired beam width from reaching the antenna and radio keeping the radio focused on signals only from desired coverage area. The kit...
Available
A$160.40

1UURS 1U Universal Rack System

1UURS
1UURS 1U Universal Rack System The 1UURS Universal 1U Rack System will hold any two Ubiquiti Tough Switches (5 or 8 port) or the Ubiquiti EdgeMAX Lite router in a convenient 19" 1U Rack system. The rack system can hold up to any two of the following: Edge-3 Router Tough Switch (5 port) Tough Switch Pro (8 port) Featuring...
Available
A$121.40

UCM3T : 3 Gang Cluster Mount

UCM3T
RF Armor Cluster Mount is designed exclusively for the Ubiquiti Rocket and MIMO sector antennas. The 3 gang cluster mounts allow three 60 or 90 or 120 degree sectors to be placed on a single pole at the same horizontal elevation in a very tight cluster. UCM3T : 3 Gang Cluster Mount UCM3T is designed to fit the following Ubiquiti antennas:...
Available
A$243.40

UNBK25 Shielding designed for the Ubiquiti5 GHz...

UNBK25
UNBK25 Shielding designed for the Ubiquiti5 GHz 40cm NanoBeam 400 versions,  Features of UNBK25: Lower noise floor Cleaner signal Superior signal to noise ratio Less wireless retries and errors Higher sustainable air rates Up to 50% increase in performance Reduce unwanted RF energy from the back, sides, top, and bottom outside the designed beam from...
Available
A$82.50

UNBK5 Shielding designed for the Ubiquiti5 GHz...

UNBK5
UNBK5 Shielding designed for the Ubiquiti5 GHz 30cm NanoBridge (22dbi version, NB5G-22) Features of UNBK5: Lower noise floor Cleaner signal Superior signal to noise ratio Less wireless retries and errors Higher sustainable air rates Up to 50% increase in performance Reduce unwanted RF energy from the back, sides, top, and bottom outside the designed...
Available
A$67.40

UNSK235 NanoStation Kit 2/3/5 GHz

UNSK235
 UNSK235 NanoStation Kit 2/3/5 GHz The UNSK235 is comatible with all Nanostations made by Ubiquiti (2.4Ghz, 3Ghz, and 5Ghz) The RF Armor Ubiquiti NanoStation shield kit reduces unwanted RF interference, protecting the radio and antenna from the back, sides, top, and bottom. The shield reduces unwanted RF energy outside the intended beam from...
Available
A$58.75

UPBK35 RF-Armor PowerBridge Kits for PBM3 and PBM5

UPBK35
UPBK35 - RF-Armor PowerBridge Kits for PBM3 and PBM5 Shielding designed for the Ubiquiti 3/5 GHz PowerBridge. F Lower noise floor Cleaner signal Superior signal to noise ratio Less wireless retries and errors Higher sustainable air rates Up to 50% increase in performance Reduce unwanted RF energy from the back, sides, top, and bottom outside the designed...
Available
A$87.40

USKT5 Titanium Sector Kit 5 GHz

USKT5
USKT5 Titanium Sector Kit 5 GHz The USKT5 shielding is designed for Ubnt antenna AM-V5G-Ti   This kit will further reduce unwanted RF energy from the back, sides, top and bottom outside the desired beam width from reaching the antenna and radio keeping the radio focused on signals only from desired coverage area.
Available
A$178.40

Wall mount for TS-8-PRO :: UTSPWM

UTSPWM
Wall mount for TS-8-PRO :: UTSPWM USTPWM is a black powder coated steel to match Tough Switch Pro textured finish.  The very stylish wall mount will hold on ToughSwitch PRO (by Ubiquiti) Four wall mount screws with easy slide in for the Tough Switch Pro.
Available
A$70.00
Product added to wishlist
Product added to compare.

We use cookies to ensure that we give you the best experience on our website,

if you continue to use this site we will assume that you are happy with it.