Mimosa B5 Integrated ptp backhaul link 4x4 MiMo
The B5 Backhaul is changing the game. Leveraging 802.11ac, 4x4:4 MIMO and radical engineering for service providers that demand the same capacity, speed and reliability as fiber. With 1.7 Gbps PHY and a unique spin on reliability, the B5 is re-defining gigabit wireless technology.
The B5 is capable of 1 Gbps throughput, a low 2 ms latency and has an integrated dual-polarized antenna with 25 dBi of gain. Ready to handle the next wave of 5 GHz, the B5 is operational from 5150-5850 MHz.
The B5 brings with it an entirely new set of features never seen before in the outdoor wireless market.
Dual Link revolutionizes backhaul reliability by load balancing across two non-contiguous channels to avoid outages due to interference. If one channel experiences interference the radio maintains connection while simultaneously searching for new replacement channel.
Additionally, Dual Link adds value by easing difficulties when searching for available spectrum in congested areas. Now, bandwidth can be split across two different channels. Experience the same throughput, with less complication.
Please note this is price for the PtP link, ie 2 units !
Antenna pattern plane
Link calulcator can be found here
|Max Throughput||Up to 1.5 Gbps IP aggregate UL/DL (1.7 Gbps PHY)|
|Low Latency||2+ ms|
|Wireless Protocols||TDMA, TDMA-FD|
|MIMO & Modulation||4x4:4 MIMO OFDM up to 256QAM|
|Bandwidth||Single or Dual 20/40/80 MHz channels|
|Frequency Range||5150-5875 MHz restricted by country of operation (*new* US/FCC 5600-5650 support)|
|Max Output Power||30 dBm (2-stream), 27 dBm (4-stream)|
|Sensitivity ( MCS 0 )||-87 dBm @ 80 MHz|
-90 dBm @ 40 MHz
-93 dBm @ 20 MHz
|Beamwidth ( 3dB )||8° ( Hpol and Vpol )|
|Elevation Adjust||± 20° mechanical adjust|
|Front-to-Back Ratio||>30 dB|
|Cross-Polar Isolation||>20 dB or better|
|Polarization||Dual-Linear (horizontal & vertical)|
|System Power Method||48 V DC 802.3 at compliant power injectors|
|System Lightning &|
|PoE Power Supply||Passive POE compliant, 48-56 V Power over Ethernet supply with IEC61000-4-5 surge protection|
|Dimensions||Diameter: 442 mm (17.4")|
Depth: 362 mm (14.3") with bracket
|Weight||4.9 kg (10.8 lbs) with bracket|
|Single enclosure with radome|
Outdoor UV stabilized plastic
Painted steel bracket plate
|Wind Survivability||200 km/h (125 mph)|
|Wind Loading||39 kg @ 160 km/h (86 lbs @ 100 mph)|
|Mounting||Pole mounting kit included for 30mm (1.18") to 90mm (3.54") OD pipes|
|-40°C to +55°C (-40°F to 131°F)|
|Operating Humidity||5 to 100% condensing|
|Operating Altitude||4420 m (14500') maximum|
|Shock & Vibration||ETS 300-019-2-4 class 4M5|
|2 independent dual-stream radios operating on non-contiguous frequencies|
Automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256 QAM
|Mimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML 5 based Web UI|
2.4 GHz 802.11b/g/n radio for local management access
|Hands-Free dedicated 2.4 GHz Wi-Fi management radio|
|Active scan monitors/logs ongoing RF interference across channels (no service impact)|
Dynamic auto-optimization of channel and bandwidth use
|Security||128-bit AES PSK with hardware|
|QoS||Supports 4 pre-configured QoS levels|
|GPS Location||GNSS-1 (GPS + GLONASS)|
|1PPS GPS TX/RX synchronization for colocated co-channel radios|
Adjustable up/downstream bandwidth ratio
|Regulatory + Compliance|
|Approvals||FCC Part 15.407, IC RS210, CE,|
ETSI 301 893/302 502
|Safety||UL/EC/EN/ 60950-1 + CSA-22.2|
The Rubik's Cube seems to be an impossible puzzle but it's easy to solve it using algorithms.