WBD-500
The WBD-500 is a powerful, 500mW (27dBm) integrated radio platform offering seamless wireless performance on the 2.4 GHz spectrum. The embedded chipset-radio design enables robust performance at an affordable price point by eliminating the need for additional mini-PCI radio hardware. With its small form factor, the WBD-500 can integrate into a variety of enclosures, both indoor and outdoor and can be used in a variety of wireless applications, including 802.11b/g customer premise equipment, access points, as well as point-to-point and point-to-multipoint wireless bridges. The WBD-500 contains 8 MB flash memory and 32 MB RAM on-board, which can support a variety of robust software applications, including the pre-loaded WILI-S software suite, a carrier-class software platform with robust security and management features. The WBD-500 can be preconfigured with either the CPE or AP version of the WILI-S graphical user interface, and is also firmware factory-compatible – an online tool for developing customized firmware and graphical user interfaces (SKINS). In addition, the WBD-500 is designed to work in an outdoor environment with on-board Ethernet surge protection, polarity independent POE, as well as on-board overvoltage and overheating protection. The WBD-500 features wide input voltage range (from 9V to 52V), allowing for easy integration and compatibility with a variety of power supplies. The on-board radio is an Atheros chipset design (AR2315) and contains advanced features such as 5/10/20 MHz channel capabilities as well as quarterwave RF protection for superior signal isolation. At a screaming 500 mW output power and excellent receive sensitivity, the WBD-500 allows for achieving long-range wireless links with unparalleled performance.
CPE scenario
Wireless client operation in IEEE 802.11 a/b/g modes;
WPA/WPA2 with PSK, TKIP/CCMP PEAP/EAP-TTLS with MSCHAP v2 wireless encryption and authentication;
Atheros Super features, WMM, full/half/quarter channel rates;
Station WDS mode;
Router and bridge modes;
DHCP client/ relay server;
Port forwarding
PPPoE client;
RSSI indication for easier antenna alignment procedure;
Advanced wireless settings, site survey, system log viewer, troubleshooting information gatherer are included with a purpose to help with device installation and tuning.
AP scenario
Multiple virtual AP;
Virtual AP tagging to VLAN‘s;
Different security settings per virtual AP;
UAM configuration per virtual AP;
Wireless ACL configuration;
RCMS agent configuration;
SNMP.
Point-to-Point and Point-to-multipoint scenario
WDS (Wireless Distribution System);
Security settings;
Antenna alignment tool;
Site survey tool;
Throughput, data rates and ACK timeout tests.
- Programmable button
- Reset button
- LED’s
- Atheros AR2315 500mW output power radio
- 32 Mbytes SDRAM
- 8 Mbytes Flash
- 1x10/100 Base-TX Ethernet Port
- Jumpers that provide access to GPIO pins and TTL serial port
- Main antenna connector (closer to the edge of board)
- AUX antenna
| Operational |
| WLAN Standard |
IEEE 802.11b/g |
| Radio Scheme |
802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK)
802.11b: DSSS (CCK, DQPSK, DBPSK) |
| Frequency Range |
2.3 GHz ~ 2.5 GHz (Country dependent) |
| Receive |
802.11g: -75 +/- 2dBm @54Mbps |
| Sensitivity |
802.11b: -90 +/- 2dBm @11Mbps |
| Data Rate |
802.11g: 54/48/36/24/12/9/6 Mbps
802.11b: 11/5.5/2/1 Mbps |
| RF Output Power |
802.11b: 27dBm @11Mbps
802.11g: 27 dBm(6~24Mbps), 26dBm(36Mbps), 24dBm(48Mbps), 23dBm(54Mbps) |
| Operating Mode |
Access Point
AP Client (Ethernet-WLAN Bridge)
WDS (Wireless Repeater, PtP, PtMP Bridge)
Wireless Router
AP Client with Routing Function (WISP Mode) |
| Electrical |
| Input voltage |
9V - 52V |
| Power consumption |
4W max
|
| Mechanical |
| Dimensions |
98mm X 82mm X 18mm |
| Weight |
47g |
| Chipset |
Atheros, AR2315 |
| Processor Speed |
183 MHz |
| Antenna Connector |
2 x MMCX |
| I/O |
1 x 10/100 TX |
| Memory |
32 MB SDRAM |
| Flash |
8 MB |
| Other Features |
Push Button Reset
LED Indicators |
| Environmental |
| Operating parameters |
| Temperature |
-25°C to +65°C |
| Humidity |
20% to 90% (non condensing) |
| Storage parameters |
| Temperature |
-40°C to +85°C |
| Humidity |
5% to 95% (non condensing) |
|
|
|
|
|
This product was added to our catalog on Monday 20 October, 2008. |
|
Follow us on Twitter