Picostation 2HP
PicoStation 2HP The Smallest and Most Powerful AP in the World, with up to 1000mW of output power
The smallest outdoor AP in the world is also the most powerful. With up to 800mW of output power, the PicoStation family of outdoor WiFi AP's can provide unprecedented range coverage.
PicoStation ships standard with the powerful and intuitive AirOS by Ubiquiti Networks. It also is supported by a Linux SDK to encourage open source development.
In addition to the LSDK support, PicoStation ships with 32MB RAM and 8MB Flash to encourage developers to customize Pico Firmware to create their own applications such as Hot-Zone deployments, mesh networking, and metering applications.
Features:
- Processor Specs: Atheros MIPS 4 KC, 180MHz
- Memory Information: 32MB SDRAM, 8MB Flash
- Networking Interface: 1 x 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
- Approvals: FCC Part 15.247, IC RS210, CE
- RoHS Compliance: YES
- Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Air OS is an intuitive, versatile, highly developed Ubiquiti firmware technology that resides on Ubiquiti Station products. It is exceptionally intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture which enables hi-performance outdoor multipoint networking.
- Dynamically router board protocol compatible
- Operate in proprietary channels; enhanced security and network privacy
- 5/10/20/40MHz options for increased throughput or increased range performance
- English, Spanish, French, Portugues, and Chinese
- Automatically converge to optimum ACK timeout value for distance links
- Adaptively SW adjust antenna polarity for optimum peformance
- Full SDK and Ubiquiti engineering support open for 3rd party firmware developments
-
Wireless Modes
- Station Bridge/Router
- Access Point Bridge/Router
- Repeater
- PtP / PtmP Bridge/Router
- Networking
- 802.3 bridging
- Router Mode - Static IP Routing
- Masquerading (NAT)
- DMZ
- Port Forwarding
- DNS Proxy
- DHCP Server and Client
- PPPoE Client
- NTP
- VLAN / 802.1q pass-through
- PPTP, Ipsec pass-through
- Wireless client bridge support
- Traffic Shaping
- MAC Cloning
-
WLAN
- AP/Station 802.11a/b/g standards
- WDS Bridging or routing
- Static wireless Access Control List
- Layer 2 User Isolation
- Transmit Power Control Support
- Super Features (Fast Frames, Bursting)
- 802.11e QoS (WMM)
- SSID Broadcast Disabling
- WPA/WPA2; TKIP, AES (CCMP), WEP
- 3 Data Rate Algorithms
- MultiCast Rate Options
- Dynamic ACK Timeout
- Antenna Diversity Control
- Noise Immunity Options
-
-
Tools
- Ping watch dog
- Antenna Alignment Tool
- Throughput test utility
- Ping
- Traceroute
-
Management
- Intuitive Web Management Interface
- CLI access via telnet
- (Backup/Restore) configuration files
- Password protected access
- Full Statistical performance reporting
- Detailed link quality information
- SNMP v1 Support
- LED indication level management
- Reset to factory defaults
- Firmware updates
- Firmware recovery TFTP
- Customizable Logo
- SDK available for customization
Options:
Open-Mesh Firmware upgrade
By choosing this item you are letting us to upgrade the standard firmware device you've purchased to the Open-Mesh Firmware, allowing you access to the dashboard at www.open-mesh.com.
Note: Please make sure you understand what does it mean (manufacturer warranty will be void after installing 3rd party firmware). |
|
|
|
|
This product was added to our catalog on Friday 22 May, 2009. |
|
Follow us on Twitter