Nanostation5 PtP link 5Ghz
Point ot Point link for middle to long distances. Very stable and well tested solution provided by Ubiquiti at a very affordable price.
Two Nanostations 5 Point to Point Link
Few clicks via web interface and the link between Nanostations will be established. High level of wireless security can be achived using WPA2-TKIP
The NS5 packs dual 13dbi antennas, a 400mW card with amazing receive sensitivity and a 4MB flash/16MB of RAM which can be used to install alternative firmware like DD-WRT or OpenWRT. The Included POE and zip tie mounting system is simple and efficient. If the built-in antennas don't give you enough juice, you can add an external adapter by using a RP-SMA pigtail.
Even if you're just connecting up a desktop computer to your wireless network, a Nanostation5 may be the easiest and best performing option.
Features of Nanostation5:
- Processor Specs: Atheros AR2316 SOC, MIPS 4KC, 180MHz
- Memory Information: 16MB SDRAM, 4MB Flash
- Networking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
- Wireless Approvals: FCC Part 15.247, IC RS210, CE
- RoHS Compliance: Yes
- TX Power: 26dBm, +/-2dB
- RX Sensitivity: -97dBm +/-2dB
- Antenna: Integrated 13dBi Dual Pol + External SMA
- Outdoor Range: over 10km
- TCP/IP Throughput: 25Mbps+
- Max Power Consumption: 5 Watts
- Power Supply: 12V, 1A (12 Watts). Supply and injector included
- Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return)
- Operating Temperature: -20C to +70C (System PCB optimized for hi-temp)
- Operating Humidity: 5 to 95% Condensing
- Weight: 0.4 kg
Note: Australian plugs are suported as standard with all Nanostations bought in our shop. |
Follow us on Twitter